Microstructures and properties of coating from cemented carbide by vacuum powder sintering

In this paper, the microstructures and properties of coating from cemented carbide of WC–Fe–Co–Ni on the substrate 45 steel are studied. The effects of sintering temperature on the microstructures of coating, the interface structures between coating and the substrate, the microhardness distribution and its wear resistance in the coating are investigated. The results indicate that the coating is strongly metallurgical bonded with the substrate by the mutual diffusion and penetration of Fe towards the coating and W, Co, Ni towards the substrate at sintering temperature ranging from 1280 °C to 1300 °C. The coating obtained exhibits compact structure and uniformly distribution of WC with fine grain and porosity free from defects, having high microhardness and preferable wear resistance.     

小截面送料双频电磁成形的试验研究

研究了金属熔体的小截面送料双频电磁成形过程。结果表明：屏蔽罩能够调节成形感应圈内的磁场分布，使成形感应圈内的熔体处于合理状态；两感应圈间必须保持一定距离，使预热感应圈的磁场不影响成形感应圈的磁场分布，利于成形稳定；在其他条件一定的情况下，有一适合的抽拉速度和电源功率匹配；并获得了表面质量良好的耐热不锈钢样件。     

回火过程应力场计算机模拟

回火过程应力场计算机模拟林家骝，杨振枢，于震宗，段贵明（清华大学）郭剑仁，史全兴，谢克仁（内蒙古第一机器厂）ＡＳｔｕｄｙｏｆＮｕｍｅｒｉｃａｌＳｉｍｕｌａｔｉｏｎｏｆＳｔｒｅｓｓＦｉｅｌｄｄｕｒｉｎｇＴｅｍｐｅｒｉｎｇ￥ＬｉｎＪｉａｌｉｕ；ＹａｎｇＺ...     

挤压模具型腔轮廓形状的多目标优化设计

采用刚粘塑性有限元分析和优化算法相结合,利用三次样条函数插值表达挤压模具型腔轮廓形状,以修正的序列二次规划法为优化方法,对挤压模具型腔轮廓形状进行了多目标优化设计,建立了多目标优化的数学模型。优化结果采用有限元软件MARC/AutoForge进行了数值模拟,验证了优化结果的有效性。在气门的实际生产实践中,证明了这种方法对提高模具寿命是十分显著的。     

CCWELD:A CIM system for robotic arc welding

ＣＣＷＥＬＤ：ＡＣＩＭｓｙｓｔｅｍｆｏｒｒｏｂｏｔｉｃａｒｃｗｅｌｄｉｎｇ￥ＫＯＮＧＹｕ；ＤＡＩＭｉｎｇ；ＷＵＬｉｎａｎｄＨＵＡＮＧＤｏｎｇｓｈｅｎｇ（ＷｅｌｄｉｎｇＤｅｐａｒｔｍｅｎｔ，ＨａｒｂｉｎＩｎｓｔｉｔｕｅｏｆｔｅｃｈｎｏｌｏｇｙ，Ｈａｒｂ...     

煤焦油蒸馏的新产品-改质沥青的生产

论述了利用热缩聚方法对中温沥青进行改质处理来生产改质沥青 ,提高了沥青的软化点、β树脂含量及结焦值 ;并介绍了生产工艺的特点、主要工艺参数及产品的质量     

丙烯酸酯三元共聚物酸掺杂改性聚苯胺的研究

选择丙烯酸 (AA)、丙烯酸丁酯 (BA)和甲基丙烯酸甲酯 (MMA)三元共聚物对聚苯胺 (PAn)进行改性 ,研究了BA的用量和引发剂浓度对PAn导电率的影响 ,对样品进行DSC、FTIR和SEM测试。结果表明 ,丙烯酸酯三元共聚物酸对PAn有良好的掺杂改性作用 ,当共聚单体 (AA -BA -MMA)组成为 10∶45∶45 (质量比 ) ,引发剂浓度为0 0 5 48mol·L-1时 ,可制得电导率达 1 42 1S·cm-1的导电PAn。     

Preparation of high-strength and high-modulus poly(vinyl alcohol) fibers by crosslinking wet spinning/multistep drawing method

This study is mainly focused on the preparation of high-strength and high-modulus poly(vinyl alcohol) (PVA) fibers by crosslinking wet spinning and multistep drawing. High strength as well as high modulus can be achieved by introduction of the crosslinks into the oriented chains to reduce entanglement degree and slippage between chains. The relationships between mechanical properties and fine structure of the drawn fibers were examined based on results of measurements of tensile property, thermal property, dynamic viscoelasticity, crystallinity, and orientation. The strength and Young's modulus of the drawn fibers are approximated to 1.82 and 51.76 GPa, respectively. The fiber has a sharp melting peak temperature that appeared at 236.7°C in the differential scanning calorimeter (DSC) curve. Our results indicate the multistep drawing procedure is superior to the conventional one-step drawing procedure. These excellent mechanical properties can be directly attributed to their high orientation of the amorphous chains. © 1994 John Wiley & Sons, Inc.     

Chrome-free single-step in-situ phosphatizing coatings on a Ti-6Al-4V titanium alloy

Surface pretreatment, such as chromate conversion, is generally required for the organic coating on Ti-6Al-4V titanium alloys. The surface modification process facilitates bond formation between the titanium surface and adhesives or paints. However, the hexavalent chromate used in the conversion coating is carcinogenic and must be eliminated. Recently, the “green chemistry” technique of in-situ phosphatizing coatings (ISPC) has been developed at Northern Illinois University. In this study, a polyester-melamine coating system catalyzed by p-toluene sulfonic acid is used as a control paint and applied to bare (paint 1) and chromated (paint 3) Ti alloy panels. The arylphosphonic acid employed as an in-situ phosphatizing reagent (ISPR) is used to formulate ISPC polyester-melamine paint and to react in-situ with the metal surface when ISPC paint is applied on bare Ti panels (paint 2) and chromated Ti panels (paint 4). After soaking in 3% NaCl solution for 1500 hr, the electrochemical impedance, |Z|, was measured as 10⁹, 10¹⁰, 10¹⁰, and 10¹⁰ ohm-cm² for paints, 1, 2, 3, and 4, respectively. After 1000 hr salt spray (fog) testing, a disbondment from the “X” scribe is observed as 13 and <0.5, <1, <1 mm for paints 1, 2, 3, and 4, respectively. The simultaneous reaction of the ISPR in catalyzing the polymerization of paint film and forming the metal-phosphate layer is the reason for the superior ISPC paint performance. Presented at the 79th Annual Meeting of the Federation of Societies for Coatings Technology, in Atlanta, GA, Nov. 5–7, 2001. Department of Chemistry and Biochemistry, DeKalb, IL 60115.     

Functionalized carbon nanotubes: properties and applications

Carbon nanotubes can be functionalized via amidation and esterification of the nanotube-bound carboxylic acids. The solubility of these functionalized carbon nanotubes makes it possible to characterize and study the properties of carbon nanotubes using solution-based techniques. Representative results concerning the solubility, dispersion, defunctionalization, and optical properties of the functionalized carbon nanotubes are presented. Several examples for the use of functionalized carbon nanotubes in the fabrication of polymeric carbon nanocomposites, the probing of nanotube-molecule interactions, and the conjugation with biological species are highlighted and discussed.